The SFP+ transceiversare high performance, cost effective modules supporting datarate of 10Gbps and 20km transmission distance with SMF.
The transceiver consists of three sections: a DFB laser transmitter,a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digitaldiagnostics functions.
Product Features
Product Features
Supports up to 10.7Gbpsbit rates
Hot-pluggable SFP+ footprint
1330nm DFBlaser and PIN photodiode, Up to 20km for SMF transmission
Compliant with SFP+MSA and SFF-8472 with simplex LC receptacle
Compatible with RoHS
Single +3.3V power supply
Real Time Digital Diagnostic Monitoring
Operating case temperature:
Standard: 0 to +70°C
Industrial: -40 to +85°C
Applications
Applications
10Gbps Optical systems
10GBASE-LR at 10.3125Gbps
10GBASE-LW at 9.953Gbps
LTE systems
Other Optical links
Absolute Maximum Ratings
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Unit
Supply Voltage
Vcc
-0.5
4.5
V
Storage Temperature
Ts
-40
+85
°C
Operating Humidity
–
5
85
%
Recommended Operating Conditions
Recommended Operating Conditions
Parameter
Symbol
Min
Typical
Max
Unit
Operating Case Temperature
Standard
Tc
0
+70
°C
Extended
-20
+80
°C
Industrial
-40
+85
°C
Power Supply Voltage
Vcc
3.135
3.30
3.465
V
Power Supply Current
Icc
350
mA
Data Rate
1.0
10.3
10.7
Gbps
Optical and Electrical Characteristics
Optical and Electrical Characteristics
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Transmitter
Centre Wavelength
λc
1320
1330
1340
nm
Spectral Width(-20dB)
Δλ
1
nm
Side-Mode Suppression Ratio
SMSR
30
–
dB
Average Output Power
Pout
-3
+2
dBm
1
Extinction Ratio
ER
3.5
dB
Data Input Swing Differential
VIN
180
850
mV
2
Input Differential Impedance
ZIN
90
100
110
Ω
TX Disable
Disable
2.0
Vcc
V
Enable
0
0.8
V
TX Fault
Fault
2.0
Vcc
V
Normal
0
0.8
V
Receiver
Centre Wavelength
λc
1260
1270
1280
nm
Receiver Sensitivity
-14.4
dBm
3
Receiver Overload
0.5
dBm
3
LOS De-Assert
LOSD
-15.5
dBm
LOS Assert
LOSA
-30
dBm
LOS Hysteresis
0.5
dB
Data Output Swing Differential
Vout
300
900
mV
4
LOS
High
2.0
Vcc
V
Low
0.8
V
Notes:
The optical power is launched into SMF.
PECL input, internally AC-coupled and terminated.
Measured with a PRBS 231-1 test pattern @10312Mbps, BER ≤1×10-12.
Internally AC-coupled.
Timing and Electrical
Timing and Electrical
Parameter
Symbol
Min
Typical
Max
Unit
Tx Disable Negate Time
t_on
1
ms
Tx Disable Assert Time
t_off
10
µs
Time To Initialize, including Reset of Tx Fault
t_init
300
ms
Tx Fault Assert Time
t_fault
100
µs
Tx Disable To Reset
t_reset
10
µs
LOS Assert Time
t_loss_on
100
µs
LOS De-assert Time
t_loss_off
100
µs
Serial ID Clock Rate
f_serial_clock
100
400
KHz
MOD_DEF (0:2)-High
VH
2
Vcc
V
MOD_DEF (0:2)-Low
VL
0.8
V
Diagnostics
Diagnostics
Parameter
Range
Unit
Accuracy
Calibration
Temperature
0 to +70
°C
±3°C
Internal
-20 to +80
-40 to +85
Voltage
3.0 to 3.6
V
±3%
Internal
Bias Current
0 to 100
mA
±10%
Internal
TX Power
-6.5 to +2
dBm
±3dB
Internal
RX Power
-17 to +1
dBm
±3dB
Internal
Digital Diagnostic Memory Map
Digital Diagnostic Memory Map
The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wireserial interface (SCL, SDA).
The diagnostic information with internal calibration or external calibration all are implemented, including received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring.
The digital diagnostic memory map specific data field defines as following.
Pin Descriptions
Pin Descriptions
Pin
Signal Name
Description
Plug Seq.
Notes
1
VEET
Transmitter Ground
1
2
TX FAULT
Transmitter Fault Indication
3
Note1
3
TXDISABLE
Transmitter Disable
3
Note2
4
SDA
SDA Serial Data Signal
3
5
SCL
SCL Serial Clock Signal
3
6
MOD_ABS
Module Absent. Grounded within the module
3
7
RS0
Not Connected
3
8
LOS
Loss of Signal
3
Note 3
9
RS1
Not Connected
3
10
VEER
Receiver ground
1
11
VEER
Receiver ground
1
12
RD-
Inv. Received Data Out
3
Note 4
13
RD+
Received Data Out
3
Note 4
14
VEER
Receiver ground
1
15
VCCR
Receiver Power Supply
2
16
VCCT
Transmitter Power Supply
2
17
VEET
Transmitter Ground
1
18
TD+
Transmit Data In
3
Note 5
19
TD-
Inv. Transmit Data In
3
Note 5
20
VEET
Transmitter Ground
1
Notes:
Plug Seq.: Pin engagement sequence during hot plugging.
1) TX Fault is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; Logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2) Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3) LOS is open collector output. Should be pulled up with 4.7k~10kΩ on host board to a voltagebetween 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
4) RD-/+: These are the differential receiver outputs. They are internally AC-coupled 100 differential lines which should be terminated with 100Ω (differential) at the user SERDES.
5) TD-/+: These are the differential transmitter inputs. They are internally AC-coupled, differential lines with 100Ω differential termination inside the module.
Recommended Interface Circuit
Recommended Interface Circuit
Mechanical Dimensions
Mechanical Dimensions
Ordering Information
Ordering Information
Part Number
Product Description
HNSFP-10G32-BX10
1330T/1270R, 10Gbps, LC, 10km, 0°C~+70°C, with DDM
HNSFP-10G23-BX10
10G SFP+ T1270/R1330 10km
HNSFP-10G32-BX20
10G SFP+ T1330/R1270 20km
HNSFP-10G23-BX20
10G SFP+ T1270/R1330 20km
HNSFP-10G32-BX40
10G SFP+ T1330/R1270 40km
HNSFP-10G23-BX40
10G SFP+ T1270/R1330 40km
HNSFP-10G32-BX60
10G SFP+ T1330/R1270 60km
HNSFP-10G23-BX60
10G SFP+ T1270/R1330 60km
HNSFP-10G32-BX70
10G SFP+ T1330/R1270 70km
HNSFP-10G23-BX70
10G SFP+ T1270/R1330 70km
HNSFP-10G45-BX80
10G SFP+ T1490/R1550 80km
HNSFP-10G54-BX80
10G SFP+ T1570/R1490 80km
HNSFP-10G45-BX100
10G SFP+ T1490/R1570 100km
HNSFP-10G54-BX100
10G SFP+ T1570/R1490 100km
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “10G BIDI SFP+ DDM LC SMF Transceiver” Cancel reply
Reviews
There are no reviews yet.